Connect a serial device to the mbed's serial port.Connect the ENC28J60 module to your Ethernet network.Connect an ENC28J60 Ethernet module to the mbed board according to the pin assignment defined in main.cpp.Compile the program and save the binary to your mbed board.

Binary data received from a client over the Ethernet is transmitted to the connected TTL serial device and in turn, data received from the serial device is sent back to the TCP/IP client via Ethernet.

The server is listening for data coming from clients for example at IP Address 192.168.1.181, Port Number 10001 (adapt to your needs). To create a 'TCP/IP to Serial Converter' an inexpensive ENC28J60 Ethernet module is connected to the mbed board and set-up as TCP/IP server. In turn, the response from the serial device is sent back to your PC by the 'TCP/IP to Serial Converter' over Ethernet connection and the application can read through the virtual serial port without knowing that it actually arrived over Ethernet. The converter then sends the data received over Ethernet to the connected TTL serial device through serial connection. Serial data sent by an application running on your PC to your PC's virtual serial port (see below how to create one) is automatically transmitted through Ethernet LAN connection to a 'TCP/IP to Serial Converter'.

You can considerably extend an existing serial connection without modifying the legacy serial communication software.

Enables communication with TTL serial device over Ethernet LAN connection.

Tcp ip over serial